Sharper peaks, better separations



Liquid Syringe Tools

The right syringe for every application

  • Dedicated tools for 57mm or 85mm syringe needle lengths available
  • Syringes available: 1.2µL / 5µL / 10µL /100µL / 250µL / 500µL / 1'000µL / 10'000µL

Headspace Tools

Constistent headspace sampling

  • Dedicated Tools for different syringe types available: 1mL / 2.5mL / 5mL (with corresponding tools)
  • Syringe temp. 40°C up to 150°C in 1°C steps
  • Syringe flush with inert gas flow through X-Y-Z rail
  • Magnetic vial transport for 2mL, 10mL and 20mL vials

SPME Arrow Tool

The tool to increase productivity in SPME

  • Holder for all PAL SPME Arrows 1.1 or 1.5mm
  • Max. penetration depth 70mm
  • Easy exchange of SPME Arrow by hand
  • Best conditioning is achieved with the SPME Arrow Conditioning Module
  • SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB


The tool for fully automatic SPME sampling

  • New SPME holder for increased fiber protection
  • Compatible with a variety of SPME fibers
  • Easy fiber exchange by hand
  • For 10mm or 20mm fiber length
  • SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB

ITEX Dynamic Headspace Tool

Powerful sample enrichment for GC
  • Rapid and sensitive enrichment of volatile and semi-volatile compounds from solid, liquid and gaseous samples
  • Powerful dynamic headspace extractions with Tenax TA trap, other materials available
  • Active cooling to minimize idle times
  • Temperature range: 40 - 350°C for efficient desorption
  • PAL Robotic Tool Changes enables head space, SPME and ITEX-sampling within one sequence
  • Watch ITEX Dynamic Tool Video or see ITEX brochure
  • ITEX method development: an open access article from Laaks et al. is available.

LC-MS Tool

Rapid injection cycles with minimized carryover 
  • The special design minimizes carryover even for the most sensitive detectors
  • Enables special injection techniques like sandwiching a sample between air gaps for accurate small volume injections
  • Flow control guarantees bubble-free solvent delivery
  • Position detection for zero dead volume positioning of syringe needle in the injector port

Dilutor Tool

For efficient and accurate addition of larger amounts of liquids
  • For the addition of larger amounts of liquid: 100µL, 1mL (standard), 5mL & 10mL dispensing syringes available
  • With the special "transfer" mode also small volumes of liquids can be handled with high precision

Pipette Tool

Essential for Life Science, Clinical  & Chemical Applications
  • For automated pipetting with 200µL or 1000µL tips
  • Single or multi-dispense mode
  • A Special adapter allows direct injection into LC-valves
  • Also work with capped vials in combination with the Decapper Module

Want to know more about the PAL system? Please contact our experts for a tailored advice.

(The PAL system will be delivered trough Axel Semrau)