Pyroprobe 5200 (HPR)
(Not available in the UK & Ireland)
CDS 5200 HPR
CDS’s HPR Pyrobe allows pyrolysis at elevated pressure with built-in reactor
The CDS HPR Pyroprobe enables users to study both high temperature and pressure in a micro-scale environment, with the convenience of results sent directly to their GC/MS. The unit is built on 5200 platform with a backpressure regulator and heated catalyst bed. Samples can be pyrolyzed at max 500 PSI (3400 kPa), passed through a user-selectable catalyst bed, and collected onto the built-in trap.
- CDS Resistively heated filament
- Pyrolysis in extreme enviroments
- User selectable catalyst reactor
- Digital display of the pressure and temperature
- Heavy duty back pressure regulator
- Optional steam module
Programmable Time: 0 - 999.9 minutes
Trap: Yes, Standard Tenax-TA
Temperature Range: Up to 1400°C
Temperature Accuracy: 1°C
Heating Rate: 0.01°C/ms to 20°C/ms
0.01°C/sec to 999.9°C/sec
0.01°C/min to 999.9°C/min
Probe Clean: Yes. User-selectable.
Probe Dry: Yes. User-selectable.
System Max Pressure: 500 PSI (3.4 MPa)
Reactor Max Temperature: 800°C
Catalyst Volume: 6 mm X 75 mm (2 ml total volume)
Interface Type: Low Thermal Mass
Interface Temperature: Up to 350°C
Interface Heating Rate: 1°C/min to 100°C/min
GC Connection: Heated Transfer line (up to 350°C)
Weight: 25 kg
Dimension (W x H x D): 280 mm X 670 mm X 480 mm
Options: Steam, Cryotrap
For more information please contact one of our specialists.