Sharper peaks, better separations

Conductivity Detector

Conductivity Detector

The electric conductivity detector is designed for ion chromatography. It is recommended for anion or cation analysis in aqueous solution.

Features


· With use of the built-in double temperature control cell, this detector enables highly sensitive measurement.
· The detector supports a wide range of measurement and is usable for ion chromatography with or without suppressor method.

Specifications

Product Code F5515010
ModelCD-200
Measurement method Two-electorode system
Measurement limit 0 to 600mS/m (0 to 6mS/cm)
Measurement range 0.0025 to 5.12mS/m, 0.025 to 51.2mS/m, 0.25 to 512mS/m
Linearity range 600mS/m
Response 0.1, 0.25, 0.5, 1.0, 1.5, 2, 3, 6sec
Auto zero limit Same as measurement limit
Baseline shift Range;0 to 2mS/m, Resolution;0.01mS/m
Integrator output 0 to 1V (Sensitivity:200, 20, 2mV/mS/m)
Recorder output 0 to 10mV/FS
External input (1) ZERO IN (2) MARKER IN
External Output (1) READY (TEMPERATURE STABILIZED)
(2) LEAK
(3) ERROR (ROM, RAM, PARAMETER, SENSOR, OVER HEAT, ZERO OVER)
(4) MARKER OUT
Cell Temperature control OFF, 30 to 50°C (1°C step), 77°C Temp. fuse
Communication port USB
Cell volume 2.5μL
Pressure rating 1MPa
Wetted materials Stainless steel 316, Teflon, PEEK
Dimension, Weight W260 x D400 x H150 (mm), ca. 8kg
Power source,
Power consumption
AC 100 to 240V±10%, 200VA max